• Measures the hardness of metals and alloys with a minimum thickness of 2 mm
• Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measuring range: 61 - 85.6 HRA, 41 - 100 HRB, 20.3 - 68 HRC, 85 - 650 HB, 50 - 999 HV, 255 - 2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV
• Stores up to 2000 measurement groups / 20 calibration sets to memory
• Provides measurements in just 2 seconds
• Probe fits into small spaces and hard-to-reach places
• Features a large and easy-to-read LCD screen, simple calibration and an RS-232 interface

The PCE-5000 is a portable hardness tester or durometer that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Ultrasonic hardness testing is considered nondestructive, as it creates a microscopic indentation only visible when using a high-powered microscope.

Featuring a quick 2-second measurement time, this UCI hardness tester is the ideal tool for weld inspection, hardness control of metal coatings, and hardness measurement of fine-grained metals, small forgings, cast materials, heat-affected zones, ion-nitrided stamping dies, and molds, forms, presses, thin-walled structures and parts, bearings, tooth flanks, pipes, tanks, steel sheets, and products with intricate or complex shapes.

Additional measuring sensors can be connected to the ultrasonic meter, which varies in their test force, which is applied to measure the hardness. The different sensors measure the hardness of the objects depending on the roughness of their surface. For example, the standard sensor with 20 N measures surfaces with a roughness of less than 5 µm. The 10 N sensor measures a roughness of less than 3.2 µm, and the one with 98 N measures a roughness of less than 15 µm.

What's in the Box

• 1x PCE-5000 UCI Durometer with 1x 4.2V Battery
• 1x 20 N Probe (standard)
• 1x Protective cap for Probe (silicon)
• 1x Probe Cable
• 1x USB Cable
• 1x USB Charger
• 1x RS-232 Interface Cable
• 1x Screwdriver
• 1x Vibration-resistant Carrying Case
• 1x User Manual