Siglent SAP5-DSI50 Accessory Kit

Features and Specifications

• For SAP5000D Differential Probe
• DSI-50 solder-in head: 5 GHz bandwidth, 400 fF input capacitance
• Lead Resistor: 24.9 ohm, lead diameter 0.4mm, connecting DUT and probe tip
• Silver Wire: 0.25mm diameter, connects DUT and probe tip

The SAP5-DSI50 accessory kit is for purchasing additional accessories when standard accessories are damaged. The DSI-50 probe head in the kit can measure differential signals with full bandwidth and low input capacitance. It can also measure single-ended signals. These tips of heads can be soldered to the DUT, freeing up hands and providing a reliable connection. We provide leads with a minimum diameter of 0.25 mm, allowing signal acquisition at very small and narrow measurement points.

When using silver wire welding, the high-frequency gain will be too large. If you want to get a lower gain in the high-frequency band, you need to change the damping resistor on the head PCB to 24.9 ohm. The default resistance is 0 ohm.

What's in the Box

• 1 solder-in head DSI-50
• 20 lead resistors
• 1 meter of silver wire