TestEquity TE-107

• Benchtop environmental chamber - temperature only
• Interior dimensions: 0.7 cubic feet (19.8L) / 12W x 9H x 11.25D"
• Temperature range: -42 to +130°C
• Voltage: 120V/60Hz/10A - uses standard wall plug
• F4T touchscreen controller included standard (original F4 controller available via option)
• 3" ports on left and right side (upgradeable to 4" via option TE-0040-107)
• User adjustable high/low limit controller protects against excess temperatures
• Backed by Industry leading 3 year limited warranty
• cTUVus listed to UL 61010-1 and CSA C22.2 No. 61010-1
• Made in the USA

Benchtop Chamber (Temperature Only); -42 to 130°C, 0.7 CuFt (19.8L)

The TestEquity TE-107 is a temperature-only environmental chamber. With a 0.7 cubic foot / 19.8L interior (12W x 9H x 11.25D"), the TE-107 is small enough for benchtop usage, as well as placement on a mobile cart (part# TE-1054) or rackmount adapter (part# TE-1073).

The TE-107 can be plugged into a standard North American wall outlet (120V/60Hz) - there is no need for a dedicated power line. Maximum current draw is 10A at 120V, recommended service line is 15A. For use outside of the United States, please see model TE-107-EX for 230V/50Hz.

The TE-107 cools without LN2 or CO2 using a non-CFC single staged refrigeration system.

The TE-107 is offered with two controller options. The F4T touchscreen is the most popular choice and is included as standard at no extra cost. For users preferring the original F4, it can be purchased as an option at the time of order.

F4T Touchscreen Controller

Modern touchscreen interface
Includes RS-232 and Ethernet
GPIB via option

F4 Controller

Original controller developed in 1998
Includes RS-232C
GPIB, Ethernet and analog retransmit via option

F4T Touchscreen Controller

The F4T is TestEquity's next-generation controller with an intuitive, 4.3" color touchscreen. The F4T is the most popular controller for use with the TE-107 and offers many easy-to-use features, including:

• Direct alphanumeric parameter entry
• Multiple levels of password security
• Profile archiving and transfer via USB flash drive
• Data logging via USB flash drive or LAN
• Graphical trend display, eliminating the need for circular chart recorders
• SCPI commands
• NEMA 4 / IP65 rating for protection against dust and water

For existing F4 users, the F4T offers an F4 compatibility mode for the most frequently used commands. Please click here for more information.

F4 Controller

The original F4 controller (non-touchscreen model) features a four-line backlit LCD to display programming, setup, operation, and help information, as well as a large LED to show chamber temperature with 0.1° resolution. Internal logic provides refrigeration compressor control for responsive and reliable performance. Includes two alarms and seven event outputs to control remote devices.

Compact size

The TE-107 was designed to use a minimal amount of space. With a weight of 124lbs and footprint of only 17 x 25.25", the TE-107 can be placed on a benchtop, as well as a rolling cart (option# TE-1054) or in a rack with its 19" rackmount adapter (option# TE-1073).

3" access ports on the left and right side

The TE-107 includes 3" access ports on the left and right side (3.83" ID), enabling users to feed wires and sensors to test samples. Foam plugs are included for when ports are not in use.

It is also possible to replace 3" ports with 4". Please see option# TE-0040-107 - this factory-installed option must be selected at the time of order.

Reversible chamber door

The chamber door can be configure to open from either the left or right side. This offers greater flexibility, making the device easily adapted to the workspace, and is very useful when two chambers are operated side by side.

Heating and cooling performance

Heating time for this device is approximately 8.5°C/minute (empty chamber / typical).

Cooling times are listed in the chart below. End temperatures are listed horizontally across the top.

Transition times are measured after a 30-minute soak at the start temperature.

Low noise operation

The TE-107 creates very little sound and vibration - the device can be placed in close proximity to staff with minimal distraction.

Cooling mode generates a sound level of 52dBA, similar to a household refrigerator. This measurement is A-weighted, measured 36" from the front surface, and 63" from the floor, in a free-standing environment.

Flexible installation and maintenance

Unlike chambers with side-to-side airflow, condenser airflow on the TE-107 goes from front to back. This enables multiple chambers to be placed side by side and helps to ensure proper thermal management when installed in a rack.

For additional ease of use, the condenser grille is removable from the front so the condenser can be cleaned without dismantling the workbench or removal from a rack.

World leading environmental chamber warranty

TestEquity offers a 3-year warranty on parts and a 1-year warranty on labor. Its nationwide service network is qualified to do the job right and always has replacement parts in stock for immediate shipment. Labor warranty applies to the United States and Canada only. To view the complete warranty statement, please click here .