TestEquity
Information notification

Happy Holidays! Our offices will be closed December 24 and 25th, and January 1.

Keysight
Keysight

Keysight E4362A/J02 Solar Array Simulator Module w/ J02 Option, 120 V, 5.4 A, 600 W, E4360 Series

Our Part #20003180

Mfr Part #E4362A/J02

Keysight E4362A/J02
Keysight
Keysight

Keysight E4362A/J02 Solar Array Simulator Module w/ J02 Option, 120 V, 5.4 A, 600 W, E4360 Series

Our Part #20003180

Condition:New

Mfr Part #E4362A/J02

$9,786.00EACH

Keysight E4362A/J02 Solar Array Simulator Module

Features and Specifications

  • (J02) Configuration modifies watts, voltage and current (below)
  • Output Ratings (Simulator and Table Modes)
    • Max. Power: 600 W
    • Voc Max.: 120 V
    • Isc Max.: 5.4 A
  • Output Ratings (Fixed mode)
    • Max Power: 600 W
    • V rated: 110 V
    • I rated: 5.4 A at 220/240 VAC / 2.7 A at 100/120 VAC
  • Ripple and Noise (20 Hz to 20 MHz)
    • Voltage rms, p-p (Simulator/Table Mode): 24 mV rms, 195 mV p-p
    • Voltage rms, p-p (Fixed Mode): 30 mV rms, 150 mV p-p
    • Current rms, p-p (Fixed Mode): 3 mA rms, 20 mA p-p

E4362A SAS Module Overview

Keysight's E4362A/J02 solar array simulator (SAS) DC power module replicates the output behavior of a solar array. The modification of the J02 option changes the characteritics to 120V, 5.4A, and 600W. Primarily functioning as a current source, the E4362A has a notably low output capacitance. It provides rapid changes in the I-V curve, enabling precise simulation of the output from diverse solar arrays under a range of environmental conditions, such as temperature, age, eclipse, and spin.

E4360 Series of Modules

E4360 Series of Modules work in conjunction with the E4360A Modular SAS mainframe which is a dual output programmable dc power source. The E4360 modules are equipped with standard features that allow for the measurement of both voltage and current. Using the hardware trigger, it's possible to swiftly take measurements from as many as 100 outputs in less than 500 milliseconds. Plus, the E4360 has the capability to simultaneously log data for both voltage and current at a rate of 10 readings per second.

And to protect your device from damage, the E4360 modules are designed with safeguards against over-voltage, over-current, and over-temperature. The E4360 can be set up in a way that if one module encounters a fault condition, other modules can detect it within 10 microseconds and promptly shut down to prevent any harmful conditions from affecting your Device Under Test (DUT).

What's in the Box

  • E4362A/J02 SAS Module

Brand: Keysight
Power Rating: 600 W
Output Voltage: 120 V
Output Current: 5.4 A
Type: Module
Series: E4360 Series
Programmable: Yes
$9,786.00EACH