TestEquity
B&K Precision
B&K Precision

B&K Precision MDL4U001 Mainframe for Electronic Load Modules, MDL4U Series

Our Part #33133.1

Mfr Part #MDL4U001

B&K Precision MDL4U001
B&K Precision
B&K Precision

B&K Precision MDL4U001 Mainframe for Electronic Load Modules, MDL4U Series

Our Part #33133.1

Condition:New

Mfr Part #MDL4U001

$1,995.00EACH
Quantity on Order:1

MDL4U001 - Mainframe

A mainframe for housing and controlling MDL4U Series DC load modules, the MDL4U001 has four slots for configuring any assortment of the modules up to 2400 W (up to 4800 W with MDL4U002 mainframe extension).

  • Mainframe with built-in controller
  • Power input: 110/220 V ± 10%, 50/60 Hz
  • Operating temperature: 2 to 104 F (0 to 40 C)
  • Standard accessories: Power cord, USB cable
  • Dimensions (W x H x D): 17.3” x 7” x 21.6” (440 x 177.3 x 549 mm)

MDL4U Series Features:
For modules MDL4U200, MDL4U252, MDL4U302, MDL4U305, MDL4U400, MDL4U505, MDL4U600

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection

Software:

  • Operating Software w/ LabVIEW 2020 Run-Time Engine (Supports Windows(R) 7/8/10)

The MDL4U Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.


BrandB&K Precision
TypeMainframe
SeriesMDL4U Series
$1,995.00EACH
Quantity on Order:1