• IPC/JEDEC J-STD-033B Moisture Sensitive Caution Label Printed on Foil Moisture Barrier Bag. Identifies moisture sensitive devices for levels 2, 2a, 3, 4, 5, and 5a as defined by J-STD-020. Does not require additional labeling.
• Film Laminate Metal Layered 0.0040” (4 mil) Thick Bag: Designed for electrostatic discharge (ESD) shielding protection when dry packing components. Meets ANSI/ESD S20.20, ANSI/ESD S541, JESD625-A, and EIA 583.
• MVTR <0.0003 grams/100Sq.In/24Hours: Meets the materials requirement of IPC/JEDEC J-STD-033B.1 for packing, shipping of moisture/reflow sensitive surface mount devices.
• <10 nJ Energy Penetration Tested per ANSI/ESD STM11.31: Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD shielding packaging inside and outside an ESD Protected Area (EPA).
• >25lb Puncture Strength Average per FTMS 101C/4046: Provides physical protection for contents.
• Dissipative Inner and Outer Surfaces Rtt <1011 ohms per ANSI/ESD STM11.11: Allows bag to be grounded when placed on a grounded surface.
• Printed with ESD Protective Symbol and Lot Code Information: Meets the requirements of ANSI/ESD S541 for quality control purposes

1Dry packaging for electronics requires three elements:     
br />
br />- To Protect     
br />- To Absorb Moisture     
br /> - To Monitor PerformanceFor detailed instructions see Technical Bulletin
br />- Moisture Barrier Bags Application Instructions.2ASTM F1249-90 test method covers a procedure for determining the rate of water vapor transmission through flexible barrier materials.3ASTM F392 (condition E) test method determines the resistance of flexible-packaging materials to flex-formed pinhole failures.