TestEquity
Ideal
Ideal

Ideal 92-691 Compression Connector, Insite RTQ, 90 Deg RG-6 F, 5/Pack

Our Part #10312360

Mfr Part #92-691

Ideal 92-691
Ideal
Ideal

Ideal 92-691 Compression Connector, Insite RTQ, 90 Deg RG-6 F, 5/Pack

Our Part #10312360

Mfr Part #92-691

$18.74Pack

Ideal 92-691 Compression Connector

With the patented InSITE™ Technology feature, now standard on all IDEAL F right angle (90°) compression connectors, field termination of these blind entry connectors is simpler, faster and now provides a higher performance connection for all coax video applications.

The InSITE window is a 360° clear window which allows the installer to verify that the prepped cable has been inserted far enough into the connector to make contact with the fixed pin-before the connector is compressed.

All IDEAL compression connectors require a ¼” x ¼” industry standard coax preparation. The prepped cable is then inserted into the connector until the folded braiding is visible within the InSITE window. No measuring, no jacket marking, no guesswork – a confident connection every time.

The IDEAL RTQ™ series of F connectors offer a single connector solution to cover a range of coax types. A patented compression sleeve design allows Regular (dual), Tri, and Quad shield cables all to be terminated within a single connector. All RTQ connectors have an all brass exterior and an inner O-ring to provide a robust, weather proof connection suitable for just about any application - indoors or outdoors.

RG 59/6/6Q sized connectors are available for use in applications and installations from 5MHz to 3GHz, including CATV, satellite, HDTV and other A/V based applications. An internal sealing compression sleeve prevents moisture from entering the backside of the connector and aides in cable retention

All RTQ™ connectors require an industry standard ¼” x ¼” cable preparation and are permanently attached to the cable when using an IDEAL OmniSeal™ Pro XL and Linear X™3 compression tool.

Features:

  • Connector Model: 6FRAISRTQ
  • Features InSITE™ Technology
  • Accepts RG-6/RG-6 Quad/RG-6 Plenum/RG-6 Quad Plenum coax cables
  • Center conductor range: All
  • Dielectric diameter range: .168” - .183”
  • Outer jacket diameter range: .226” - .305”
  • Recommended cable prep/stripping tools: 45-605 PrepPRO™; 45-526
  • Recommended compression tool: 30-793 OmniSeal™ Pro XL; 33-632 Linear X™ 3
  • Installing one-piece compression right angle F connectors just got easier. No more uncertainty when inserting the cable into the connector. No more collapsed center pins. No more wasted connectors and rework time on the job.
  • RTQ™ design allows Regular/Tri/Quad shield cables to work in a single connector – no need to carry cable specific connectors
  • Right angle design allows for better cable routing options behind devices and from wallplates
  • Designed for use in cable and satellite TV installations
  • WeatherProof™ - internal O-ring and patented back seal prevent moisture migration for indoor/outdoor use
  • Return loss: >25dB up to 1 GHz; >18dB up to 3 GHz
  • All brass, with nickel plated bodies
  • Designed for optimal performance on 75Ω coaxial cables
  • Frequency range: 0 MHz to 3 GHz
  • >40 pounds cable retention on all models
  • 7/16” nut diameter with 3/8-32 thread
  • The 90° compression connectors are the only IDEAL connectors that require the 30-793 compression tool to be adjusted.
  • Compression tool instructions:
  • Loosen the locknut by turning the post counterclockwise with a flathead screwdriver.
  • With the handle in the closed position, lower the post with the screwdriver until the top of the post is even with the bottom adjustment line of the tool.
  • Tool is now set for 90° connectors. Will compress against the top spring clip level.
  • To reset tool to default position, close handle and raise post to the middle (longest) adjustment mark.
  • Retighten locknut by hand, then secure it with a clockwise turn of the post.

BrandIdeal
ColorBlue
Wire Gauge Capacity23 AWG
$18.74Pack