TestEquity
PCE Instruments
PCE Instruments

PCE Instruments PCE-830-1 Three-Phase Datalogging Power Meter (with 100A Clamps)

Our Part #20000594

Mfr Part #PCE-830-1

PCE Instruments PCE-830-1
PCE Instruments
PCE Instruments

PCE Instruments PCE-830-1 Three-Phase Datalogging Power Meter (with 100A Clamps)

Our Part #20000594

Condition:New

Mfr Part #PCE-830-1

$3,155.00EACH

  • Power meter with 3x 100A clamps (PCE-6801)
  • Electrical conductor pickup: 30mm diameter
  • Clamp range selection: Manual (1A, 10A, 100A)
  • Analysis of a network of 3 phases / 4 conductors, 3 phases / 3 conductors, 1 phase / 2 conductors, 1 phase / 3 conductors
  • AC current measurement with PCE-6801: 0.04A – 100 A
  • Measures effective real value, active power, apparent and reactive power, Power Factor, phase angle, energy and work
  • 512 KB of memory with programmable intervals to save data every 2 to 3000 seconds, 17,470 readings using the system of 3 phases / 4 conductors
  • Indicates wave forms, efficiency parameters, and harmonic distortion
  • Backlit LCD with dot matrix
  • Average power, Maximum power with the programmable period

The PCE-830 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetric. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The backlit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Power Meter.

In data logger mode, it can save up to 17,470 readings (3 phases / 4 conductors), in a simpler setup (1 phase / 2 conductors) it can save up to 52,400 readings, split into 85 groups. All this makes the PCE-830 Power Meter the ideal instrument for taking measurements over long durations. Measurement values obtained can be sent to a computer and processed with the included analysis software. The device comes with everything that needs to be measured and analyzed from the moment it arrives.

What's in the Box

  • 1x PCE-830 Power Meter
  • 3x Amp clamps - PCE-6801
  • 4x Alligator Clips
  • 4x Safety Test lines (3 m / 3.3 ft long)
  • 8x Batteries
  • 1x Mains Adaptor
  • 1x Carrying Case
  • 1x USB Cable Software
  • 1x User Manual

Brand: PCE Instruments
Battery Type: AA
Frequency Range: 50 / 60 Hz
Height: 10.1"
Length: 6.1"
Series: PCE-830 Series
Width: 2.2"
Memory: Internal Memory
Safety Rating: CE, CAT3
Power Supply: Battery Powered
IO Interface: USB, RS-232
Warranty: 2 Years
$3,155.00EACH