Instek APS-7100 Programmable AC Power Source Overview:

Output Capacity:
- APS-7050: 500 VA, 310 Vrms; 4.2 / 2.1 Arms
- APS-7100: 1000 VA, 310 Vrms; 8.4 / 4.2 Arms
4.3 inch TFT-LCD Display, Only 88mm (2U) case height
Arbitrary Waveform Function
Surge/Dip control for artificial surges or dips in voltage to a DUT
Measurements include Voltage, Current, Power, Apparent Power, Current (peak), IPKH, Frequency, Power Factor, Crest Factor
10 sets of presets in the Sequence mode, Simulate mode, and Programming mode
SCPI Emulation, LabVIEW Driver
Standard interface: USB Host, LAN
Support remote control: Sync Output, Program mode signal output, Trigger In/Out, and Output
USB, LAN standard. GPIB, RS-232 optional
Two-year warranty

500/1000 VA Programmable AC Power Source

APS-7000 is a series of two programmable linear AC power supplies, with the height of 2U and output frequency range is 45–500 Hz. The maximum rated output for APS-7050 is 500 VA, 310 Vrms, 4.2 Arms and APS-7100 is 1000 VA, 310 Vrms, 8.4 Arms. Options are available to extended to the maximum output voltage to 600 Vrms and maximum output frequency to 999.9 Hz. The APS-7000 series comprises nine measurement and test functions (Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF), and provides an interface similar to that of AC Power Meter.

The APS-7050 and APS-7100, via switching many sets of current levels to increase small current measurement resolution, are ideal for the LED industry and standby mode power-consumption test. To meet the test criteria of line voltage fluctuation often seen in consumer electronics, APS-7000 models not only supply a stable source of AC, they also features five methods to cope with special purpose or abnormal voltage, frequency, and phase; ten sets of the Simulate mode simulate power outage, voltage increase, and voltage drop; ten sets of the Sequence mode allow users to define parameters and produce sine wave by editing steps; ten sets of the Program mode can edit AC waveform output and define the ceiling and floor level of measurement items for different DUT; Ramp Control allows users to set the variation speed for output voltage rise and fall; Surge/Dip Control simulates DUT's input power producing a Surge or Dip voltage overlapping with output voltage waveform at a specific time.

APS-7000 Series AC Power Sources

Maximum Output Capacity	APS-7050		APS-7100
Power Rating	500 VA		1 kVA
Output Voltage Setting Range	0 to 155 Vrms, 0 to 310 Vrms, 0 to 600 Vrms (APS-003), Auto
Output Maximum Current Range	4.2 A / 2.1 A / 1.05 A (APS-003)		8.4 A / 4.2 A / 2.1 A (APS-003)
Output Maximum Peak Current Range	16.8 A / 8.4 A / 4.2 A (APS-003)		33.6 A / 16.8 A / 8.4 A (APS-003)
Output Frequency Setting
Range	45.0 to 500 Hz	45 to 999.9 Hz (APS-004)	45.0 to 500 Hz	45 to 999.9 Hz (APS-004)
Resolution	0.01 Hz (45.0 to 99.99 Hz) 0.1 Hz (100.0 to 500.0 Hz)	0.01 Hz (45.0 to 99.99 Hz) 0.1 Hz (100.0 to 999.9 Hz)	0.01 Hz (45.0 to 99.99 Hz) 0.1 Hz (100.0 to 500.0 Hz)	0.01 Hz (45.0 to 99.99 Hz) 0.1 Hz (100.0 to 999.9 Hz)

The APS-7050 and APS-7100 can produce high complicated waveform and transient waveform to verify electronic product operation under adverse conditions, making them suitable for testing applications and electronic components.

Included:

User's manual and programming manual on CD
Mains terminal cover set
Power cord
Two test leads
Certificate of calibration