19036 Wound Component Electrical Safety TestAnalyzer

Features:

• 5-in-1 composite analyzer (ACV / DCV / IR / DCR / Impulse)
• Hi-pot test:
• AC max. 5kV / DC max. 6kV
• High Frequency Contact Check (HFCC)
• Insulation Resistance (IR): Max. 5kV
• DC Resistance (DCR): DCR Balance
• Impulse Winding Test (IWT)
  • Waveform sampling rate 200MHz
  • 2 judgments in IWT BreakDown Voltage mode
  • 7 judgments in test mode
  • Delta /Y DC Resistance (Delta/Y DCR )
  • Impulse Winding Test Compare (IWT CMP)
  • High-Speed Contact Check (HSCC)
  • Open/Short Check (OSC)
  • Supports 3302/3252 inductance, Q-value measurement (optional)
• Ground Fault Interrupt (GFI)
• Supports max. 40-channel scanning test
• Standard LAN, USB, RS232 interfaces
• USB data storage and screen capture functions
• User interfaces: English, Traditional Chinese, and Simplified Chinese

The 19036 is equipped with a patented 4-wire DC resistance test that has both Drive and Sense in compliance with withstanding specification and provides 10 channels of 4-wire DC resistance test functions. Up to 40 channels of scanning test can be conducted when the 19036 is configured with the optional 16 channel external HV scan boxes.

The 19036 includes Flashover Detection built-in. Flashover is an electrical breakdown of a gas that produces an ongoing plasma discharge, resulting from a current flowing through normally nonconductive media such as air. Since flashover cannot be simply detected by the leakage current rms value, the Flashover Detection feature is an invaluable part of the HV test. For Contact Checking during the hipot test, the 19036 is equipped with a High Frequency Contact Check (HFCC). By conducting the Contact Check during Hipot test, it can increase the test reliability and efficiency significantly by identifying test fail problems caused by bad contact of cabling or the test fixture.